Tungsten Carbide Fa'auma Vaega
Tungsten Carbide Vaega Faia e Poloaiga
| Alamanuia Tulaga Taiala | Fa'amauina Cobalt % | Malosi (g/cm3) |
|---|---|---|
| C2 | 6% | 14.95 |
| C1 | 7.5% | 14.70 |
| C10 | 9% | 14.60 |
| C11 | 12% | 14.30 |
| C12 | 15% | 14.00 |
| C13 | 20% | 13.60 |
| C14 | 25% | 13.15 |
Tungsten Carbide ISO Numera
| ISO Standard | Fa'amauina Cobalt % | Malosi (g/cm3) |
|---|---|---|
| K01 | 3% | 14.9-15.3 |
| K10 | 6% | 14.8-15.1 |
| K20 | 6% | 14.7-15.1 |
| K40 | 10% | 14.3-14.7 |
| K30 | 15% | 13.9-14.2 |
Custom Finished Parts Made to Order Include:
| Auupega | Guide Wheels | Chock Stems |
| Raters | Wear Parts | Alatoto |
| Seal Rings | Valve Seats | Sleeves |
| Any Other Special Part Requests |
Tungsten carbide is available in various grades, each designed to meet specific performance requirements for different applications. The primary grades are categorized based on their cobalt content, grain size, and intended use. Here are some of the common tungsten carbide grades:
- WC-Co Grades: These are the most widely used tungsten carbide grades, consisting of tungsten carbide (WC) combined with cobalt (Co) as a binder. The cobalt content typically ranges from 3% i le 20%, affecting hardness and toughness. Lower cobalt content provides higher hardness, while higher cobalt content enhances toughness.
- Fine and Ultra-Fine Grades: These grades feature smaller grain sizes, e maua ai le fa'aleleia atili o le ofuina ma le mae'a. E masani ona faʻaaogaina mo meafaigaluega tipi saʻo ma faʻaoga e manaʻomia ai pito maʻai.
- Fa'ailoga Maualuga: Ua fuafuaina mo tulaga ogaoga, o nei togi e mafai ona aofia ai faʻaopoopoga e pei o le nickel poʻo le chromium e faʻaleleia ai mea faʻapitoa e pei o le pala poʻo le faʻapalepale vevela. E fetaui lelei mo faʻaoga i totonu o siosiomaga faigata, pei ole suau'u ma kesi vili.
- Vasega Fa'asili-Ele'ele: O nei togi o lo'o tu'ufa'atasia ai mea sima e fa'aopoopo atili ai le ma'a'a ma le fa'alavalava. E fetaui lelei mo talosaga e manaʻomia ai le malosi o le abrasion.
- Fa'ailoga Fa'apitoa: O le tele o gaosiga e ofoina atu togi faʻapipiʻi tungsten carbide e faʻafetaui manaoga tulaga ese o pisinisi faʻapitoa poʻo talosaga., fa'atagaina le paleni o le maaa, maaa, ma ofuina le tetee.
O vasega taʻitasi o le tungsten carbide ua faʻainisinia e faʻamalieina le faʻatinoga mo lona faʻamoemoega, fa'amautinoa e mafai e tagata fa'atau ona filifili le filifiliga sili ona talafeagai mo latou mana'oga.
Masani Talosaga Alamanuia
FAʻAMATALAGA O MOLIMAU - FAʻAALIGA Soʻo se fautuaga o oloa apalai poʻo iʻuga e avatua e aunoa ma se faʻailoga poʻo se warranty, a le o le faʻaalia pe faʻaataata mai. E aunoa ma se tuusaunoa poʻo le faʻatapulaʻaina, e leai ni faʻamaoniga o le fefaʻatauaʻiga poʻo le faʻamalosi tino mo se faʻamoemoe pe o se talosaga. E tatau i le tagata faʻaaoga ona iloilo atoa uma gaioiga ma faʻaoga i itu uma, aofia ai le talafeagai, tausisia tulafono talafeagai ma le le solia o aia a isi Eagle Alloys Corporation ma ana paʻaga tatau ona i ai se noataga e tusa ai.
