4032 Aluminum Alloy Suppliers

Available Forms

Product Overview

Eagle Alloys Corporation (EAC) is the leading global supplier of 4032 (Deltalloy®) Aluminum Alloy in castings, forgings, billets, foil, fin, coil, ribbon, strip, sheet, plate, wire, rod, bar, tubing, rings, blanks, and custom sizes. Eagle Alloys Corporation is an ISO Certified Corporation and has been supplying the highest quality 4032 Aluminum Alloy for over 35 years. A wide variety of sizes are available from stock with same or next day shipping.  If Eagle Alloys does not have your exact requirement in stock, we can offer competitive pricing with short lead times.

Eagle Alloys Aluminum 4032 Capabilities

Form
Min Size
Max Size
Typical Stock Size
Foil / Sheet / Strip / Plate
0.010" Thk
8" Thk
6"-12" w x 12-24" lg
Rod / Round Bar
0.500" Dia
23" Dia
6' & 12' Lengths
*Custom sizes upon request

Aluminum 4032 Stock Sizes Same Day Shipping (subject to prior sale)

Sheet/Strip/Plate
  • 0.010" Thk x 4"w x 24" Lg
  • 0.010" Thk x 12"w x 36" Lg
  • 0.015" Thk x 4"w x 12" Lg
  • 0.015" Thk x 12"w x 36" Lg
  • 0.020" Thk x 6"w x 12" Lg
  • 0.030" Thk x 6"w x 24" Lg
  • 0.035" Thk x 6"w x 24" Lg
  • 0.040" Thk x 6"w x 24" Lg
  • 0.050" Thk x 6"w x 24" Lg
  • 0.060" Thk x 6"w x 24" Lg
  • 0.080" Thk x 6"w x 24" Lg
  • 0.080" Thk x 12"w x 12" Lg
  • 0.100" Thk x 5"w x 18" Lg
  • 0.125" Thk x 12"w x 12" Lg
  • 0.190" Thk x 6"w x 24" Lg
  • 0.190" Thk x 12"w x 12" Lg
  • 0.250" Thk x 6.500"w x 20" Lg
  • 0.250" Thk x 8"w x 12" Lg
  • 0.375" Thk x 16"w x 16" Lg
  • 0.400" Thk x 6.5"w x 20" Lg
  • 0.500" Thk x 4.05"w x 24" Lg
  • 0.500" Thk x 6"w x 6" Lg
  • 0.625" Thk x 5.85"w x 24.5" Lg
  • 0.750" Thk x 6"w x 6" Lg
  • 1" Thk x 6"w x 6" Lg
  • 2" Thk x 6.5"w x 8.5" Lg
Wire/Rod/Round Bar
  • 0.500" Dia x 12' Lg
  • 0.625" Dia x 12' Lg
  • 0.688" Dia x 12' Lg
  • 0.750" Dia x 12' Lg
  • 0.875" Dia x 12" Lg
  • 1" Dia x 12' Lg
  • 1.125" Dia x 12' Lg
  • 1.250" Dia x 12' Lg
  • 2" Dia x 12' Lg
  • 2.500" Dia x 9' R/Lgs.
  • 3.375" Dia x 40" Lg
  • 4.500" Dia x 12' Lg
  • 6" Dia x 24" Lg

Aluminum 4032

About 4032 Aluminum Alloy (Al, Si, Mg, Cu, Ni)

4032 Aluminum Alloy has excellent machinability and drilling characteristics produced by a winning combination of controlled composition and cold finishing. Unique combination of in-service performance and manufacturing productivity that ensure superior wear resistance, tighter tolerances, exemplary surface finish and consistency. 4032 Aluminum eliminates the need for hard coat anodizing used in high temperature forging applications. 4032 is suggested for applications requiring wear and abrasion resistance.

Aluminum 4032 alloys are typically used for parts of equipment or automobiles that require a high wear resistance, low coefficient of thermal expansion, have good weldability, good corrosion resistance and has the ability to replace 12L14 steel based on wear resistance. This can reduce product flow time (elimination of anodizing) as well as eliminate the environmental issues associated with anodizing. 4032 is often used in the auto industry for master brake cylinders, transmission valves, forged pistons, bushings for rack and pinion steering systems as well as other applications such as copier parts, sound recording devices, bearings and hydraulic applications.

Properties & Applications

Aluminum 4032 Typical Applications

Aluminum 4032 Specifications (upon request)

Aluminum 4032 is not listed as a specialty metal and therefore not subject to the qualifying country clause.

Aluminum 4032 Nominal Composition

Silicon (Si)
11.0-13.5%
Iron (Fe)
1.0% max
Copper (Cu)
0.50-1.3%
Magnesium (Mg)
0.8-1.3%
Chromium (Cr)
0.10% max

Aluminum 4032 Physical Properties

Density lbs/cu in:
0.097

Common Industry Applications

STATEMENT OF LIABILITY - DISCLAIMER Any suggestion of product applications or results is given without representation or warranty, either expressed or implied. Without exception or limitation, there are no warranties of merchantability or of fitness for particular purpose or application. The user must fully evaluate every process and application in all aspects, including suitability, compliance with applicable law and non-infringement of the rights of others Eagle Alloys Corporation and its affiliates shall have no liability in respect thereof.

X

Contact Eagle Alloys

Toll Free: 800.237.9012
Local: 423.586.8738
Fax: 423.586.7456

Email: sales@eaglealloys.com

Company Headquarters:
178 West Park Court
Talbott, TN 37877

Or fill out the form below:
  • Drop files here or
    *Hold ctrl to select multiple files.
  • This field is for validation purposes and should be left unchanged.