Skip to Content

Hafnium Bar

Hafnium Bar
Interested in Hafnium Bar?

Eagle Alloys Corporation is an ISO Certified Corporation and have been supply the highest quality Hafnium bar for over 35 years.  EAC can offer a wide variety of sizes in Hafnium bar and can supply custom bar sizes with short lead times.

Eagle Alloys Corporation can supply Hafnium bar from 0.125” Dia up to 10” Dia.  For smaller diameters EAC can supply Hafnium wire as small as 0.003” Dia.  If you do not see your Hafnium bar size listed below, please contact our courteous sales team to assist you.

Hafnium is typically supplied to meet the requirements of Hafnium (Hf), 99.5%Hf (2N5), 99.9%Hf (3N), ASTM-B-776 Grade R1 or Grade R3, ASTM-B-737 Grade R1 or Grade R3. Hafnium bar applications include nuclear reactors, nuclear submarines, medical treatment equipment, fuel cells, solar energy.

Hafnium has good corrosion resistance and high strength. It resists corrosion due to formation of a tough, impenetrable oxide film on its surface. Hafnium is unaffected by alkalis and acids, except hydrofluoric acid. Hafnium is difficult to separate form zirconium, because the two elements have atoms that are the same size.  Hafnium and its alloys are used for control rods in nuclear reactors and nuclear submarines because hafnium is excellent at absorbing neutrons and it has a very high melting point and is corrosion resistant. It is used in high-temperature alloys and ceramics, since some of its compounds are very refractory: they will not melt except under the most extreme temperatures.

Eagle Alloys supplies DRC Conflict Free material.  EAC only sources our Hafnium bar from Level 1 smelters.

Eagle Alloys Hafnium Bar Capabilities

Size Range
Max Size
Hafnium Bar
0.125”Dia up to 10”Dia
20ft length
*Wire avail in coils or spools
Hafnium (Round Stock)
0.003"Dia up to 10"Dia
20ft length
*Wire avail in coils or spools
*Custom sizes upon request

Common Industry Applications

STATEMENT OF LIABILITY - DISCLAIMER Any suggestion of product applications or results is given without representation or warranty, either expressed or implied. Without exception or limitation, there are no warranties of merchantability or of fitness for particular purpose or application. The user must fully evaluate every process and application in all aspects, including suitability, compliance with applicable law and non-infringement of the rights of others Eagle Alloys Corporation and its affiliates shall have no liability in respect thereof.


Contact Eagle Alloys

Toll Free: 800.237.9012
Local: 423.586.8738
Fax: 423.586.7456


Company Headquarters:
178 West Park Court
Talbott, TN 37877

Or fill out the form below:

"*" indicates required fields

Drop files here or
Max. file size: 32 MB.
    *Hold ctrl to select multiple files.
    Do you want to receive future emails?*
    This field is for validation purposes and should be left unchanged.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply