Tantalum is a ductile metal. Tantalum has excellent corrosion resistance to most chemicals
except hydrofluoric acid. Tantalum has a melting point exceeded only by tungsten & rhenium. The melting point of tantalum is approximately 3017 degrees Celsius. Tantalum's
main end uses are in capacitors, vacuum furnaces, chemical process equipment, nuclear
reactors and aircraft parts.
Our inventory and production sizes are as follows:
Tantalum Sheet & Plate
|
Thickness |
Width |
Length |
| .005"-.009" |
to 4" |
R.L.or Coil |
| .001"-.010" |
to 12" |
R.L. or Coil |
| .010"-.020" |
to 24" |
R.L. or Coil |
| .025"-.500" |
to 24" |
R.L. or Coil |
| .500"-4.00" |
x R/W |
x RL |
Tantalum Rod
| 1/8" dia x r/l |
2" dia x r/l |
|
| 3/16" dia x r/l |
2-1/4" dia x r/l |
|
| 1/4" dia x r/l |
2-1/2" dia x r/l |
|
| 3/8" dia x r/l |
2-3/4" dia x r/l |
|
| 1/2" dia x r/l |
3" dia x r/l |
|
| 3/4" dia x r/l |
3-1/4" dia x r/l |
|
| 1" dia x r/l |
3-1/2" dia x r/l |
|
| 1-1/2" dia x r/l |
3-3/4" dia x r/l |
|
| 1-3/4" dia x r/l |
4" dia x r/l |
|
Tantalum Wire
| Size |
|
Size |
|
| .010" x 250 |
feet/spool |
.040" x |
R.L. Coils |
| .015" x 100 |
feet/spool |
.050" x |
R.L. Coils |
| .020" x 260 |
feet/spool |
.062" x |
R.L. Coils |
| .025" x 160 |
feet/spool |
.094" x |
R.L. Coils |
| .030" x 100 |
feet/spool |
|
|
|
|
|
|
Tantalum Ribbon
Size - .002" Minimum Thickness x 2" maximum width x Coil
Tantalum Tubing
All are random lengths. Specific lengths available upon request. All tubing is annealed unless otherwise specified. Tubing is available in both seamless or welded and seamless.
| OD |
Wall |
OD |
Wall |
| 1/8" |
0.15" |
5/8" |
.020 |
| 3/16" |
.015" |
3/4" |
.020 |
| 1/4" |
.015", .020" |
1" |
.020 |
| 3/8" |
.020" |
1"-1/4" |
.020 |
| 1/2" |
.020" |
1"-1/2" |
.020 |
| 2" |
.020 |
|
|
Tantalum Alloys - upon Request
TANTALUM - 10% TUNGSTEN TANTALUM - 2-1/2% TUNGSTEN
Combine tantalum corrosion resistance with tungsten's high temperature
strength. Available in most of the same sizes and shapes as pure tantalum.
Tantalum is available in several types: Powder Metallurgical, E.D. Melted,
and Arc-Cast. Advising us of your intended use will enable us to best
match the correct type and annealed to your requirements.
We make finished parts to print
