Skip to Content

Nickel Alloy Pipe

Other Available Forms
Nickel Alloy Pipe
Interested in Nickel Alloy Pipe?

Eagle Alloys Corporation (EAC) is a leading global supplier of Seamless and Welded Nickel Alloy Tubing. A wide variety of sizes from 1/16” OD up to a 4” OD are available for immediate shipping from stock in various alloys and grades:

Alloy 200, 201, 330, 400, 600, 601, 625, 718, 800, 800H, 800HP, 800HT, 825, 904L, AL6XN, Alloy 20, Alloy K500, C22, C276, Hastelloy X®, Inconel®, Monel®, Incoloy®

Please contact our courteous sales staff for pricing and availability on your exact requirements.  We are always adding sizes so be sure to check with our sales team if you do not see your exact size listed!

Eagle Alloys supplies a wide variety of nickel alloy pipe and tubing to suit an endless array of modern applications. Nickel alloys are among the most popular contemporary alloys and are commonly used for their high resistances to corrosion, heat, pressure and warping. We supply many of the most popular nickel alloys, including pipes and tubing using Inconel®, Monel®, and Incoloy® alloys.

Nickel alloys are used almost everywhere, from engines, generators and reactors to oil refinery, chemical refinery and even everyday products such as doorknobs, eyeglasses and musical instruments. Over a hundred years of development have given nickel alloys their vast applications and strength and yielded a variety of forms. We supply Inconel®, Monel®, and Incoloy® alloys for everyday uses as well as high-stress industrial, energy or chemical environments.

Adding chromium, molybdenum, copper and other elements to the nickel alloys gives them an even higher resistance to oxidation and corrosion which makes it possible to use them in a wider range of applications. Tubes and pipes made of corrosion resistant nickel alloys are the first choice for a lot of applications due to their excellent resistance to various acids (sulphuric acid, hydrochloric acid, phosphoric acid) and alkaline solutions.

A further increase of specific alloy elements (such as chromium, molybdenum, tungsten, titanium, aluminium, niobium, etc.) improves the high temperature, high strength characteristics of austenitic steels. The disadvantage of austenitic stainless steels occurs in the fact that these elements have a reduced solubility. In order to compensate this effect and to reach the desired result, the nickel concentration can be increased. The highest alloyed types of high temperature nickel-based alloys contain only a very low iron concentration.

Hastelloy® is a Registered Trademark of Haynes International
Inconel® Incoloy® Monel® are Registered Trademarks of
Special Metals Corporation and Its subsidiaries

Eagle Alloys Nickel Alloy Pipe Capabilities

Form
Min Size
Max Size
Typical Stock Size
Nickel Alloy Pipe OD
1/8" IPS (0.405"OD)
up to 20" IPS (20.000"OD)
20 ft random lengths
Nickel Alloy Pipe OD Wall
SCH 10
up to SCH XXH
Contact Us For Sizing
*Custom sizes upon request

Nickel Alloy Pipe Stock Sheet

Nickel Alloy Pipe Available Alloys (S=Seamless / W=Welded)
1/8" IPS (0.405"OD) + Click to open.
1/4" IPS (0.540"OD) + Click to open.
3/8" IPS (0.675"OD) + Click to open.
1/2" IPS (0.840"OD) + Click to open.
3/4" IPS (1.050"OD) + Click to open.
1" IPS (1.315"OD) + Click to open.
1-1/4" IPS (1.660"OD) + Click to open.
1-1/2" IPS (1.900"OD) + Click to open.
2" IPS (2.375"OD) + Click to open.
2-1/2" IPS (2.875"OD) + Click to open.
3" IPS (3.500"OD) + Click to open.
3-1/2" IPS (4" OD) + Click to open.
4" IPS (4.500"OD) + Click to open.
5" IPS (5.563"OD) + Click to open.
6" IPS (6.625"OD) + Click to open.
8" IPS (8.625"OD) + Click to open.
10" IPS (10.750"OD) + Click to open.
12" IPS (12.750"OD) + Click to open.
14" IPS (14"OD) + Click to open.
16 " IPS (16"OD) + Click to open.
18" IPS (18" OD) + Click to open.
20" IPS (20"OD) + Click to open.

Common Industry Applications

STATEMENT OF LIABILITY - DISCLAIMER Any suggestion of product applications or results is given without representation or warranty, either expressed or implied. Without exception or limitation, there are no warranties of merchantability or of fitness for particular purpose or application. The user must fully evaluate every process and application in all aspects, including suitability, compliance with applicable law and non-infringement of the rights of others Eagle Alloys Corporation and its affiliates shall have no liability in respect thereof.

X

Contact Eagle Alloys

Toll Free: 800.237.9012
Local: 423.586.8738
Fax: 423.586.7456

Email: sales@eaglealloys.com

Company Headquarters:
178 West Park Court
Talbott, TN 37877

Or fill out the form below:

"*" indicates required fields

Drop files here or
Max. file size: 32 MB.
    *Hold ctrl to select multiple files.
    Do you want to receive future emails?*
    This field is for validation purposes and should be left unchanged.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply